- Fully automatic self cleaning cycle. Removes collected grease & oils from tank without any operator
assistance. Comes complete with 24-hour timer and Grease Collector.
- Constructed of corrosion resistant materials suitable for installation in virtually
any location. Attractive sanitary Stainless Steel exterior.
- Integrated Motor/Grease Outlet/Heater/Lid enables a fast, do-it-yourself unit operation
reversal.
- Easy lift grease collector simplifies grease collection container emptying.
- Compact footprint.
Product Information
Material Exterior: 304 Stainless Steel, Bright Finish
Material Interior: Rotationally Molded Polyethylene
Electrical: 115 VAC, 60 Hz, 535 Watts (4.6 Amps)
Maximum Inlet Flow Rate: 75 GPM
Number of Skimming Wheels: 1
Skimming Rate: 20 Pounds Per Hour
Grease Retention Capacity: 150+ Pounds
Eductor Pump Operation Water Requirements: 50 PSI min., 12 GPM
Thermaco Big
Dipper W-750-AST, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator
for floor mounted or partially recessed installation, rated at 75 gallons per minute peak flow, 150 pounds of grease capacity and including as an integral part of the
unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device, self-regulating enclosed electric immersion heater,
a vessel vent, an integral gas trap, an integral programmable 24-hour multi-event time control, a field reversible motor location, a field reversible grease/oil sump
outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, lift-out filter basket access, an eductor transfer pump
controlled by repeat cycle timer, and a separate grease and oils collection container. Eductor pump shall be supplied with a 0.5” female connector for attachment
to facility supplied water supply. Eductor pump shall be supplied with an approved vacuum breaker. Electric assembly shall be tested to comply with pertinent sections
of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with thermal overload protection with automatically resettable switch. CAD Drawings:
| 
