- Fully automatic self cleaning cycle. Removes collected grease &
oils from tank without any operator assistance. Comes complete with 24-hour timer and Grease Collector.
- Constructed of corrosion resistant materials
suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
- Integrated Motor/Grease Outlet/Heater/Lid enables a
fast, do-it-yourself unit operation reversal.
- Easy lift grease collector simplifies grease collection container emptying.
- Compact
footprint.
Product Information
Material Exterior: 304 Stainless Steel, Bright Finish
Material Interior: Rotationally Molded Polyethylene
Electrical: 230 VAC, 50 Hz, 535 Watts (2.3 Amps)
Maximum Inlet Flow Rate: 4.73 l/s
Number of
Skimming Wheels: 1
Skimming Rate: 9.08 Kg Per Hour
Grease Retention Capacity: 68+ Kg
Eductor Pump Operation Water Requirements: 3.45 Bar min.,
0.75 l/s
Thermaco Big Dipper W-750-AST-E, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic
self-cleaning grease and oil recovery separator for floor mounted or partially recessed installation, rated at 4.73 liters per second peak flow, 68 Kilograms of grease
capacity and including as an integral part of the unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device,
self-regulating enclosed electric immersion heater, a vessel vent, an integral gas trap, an integral programmable 24-hour multi-event time control, a field reversible
motor location, a field reversible grease/oil sump outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, lift-out
filter basket access, an eductor transfer pump controlled by repeat cycle timer, and a separate grease and oils collection container. Eductor pump shall be supplied
with a 13 mm female connector for attachment to facility supplied water supply. Eductor pump shall be supplied with an approved vacuum breaker. Electric assembly shall
be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor shall be equipped with thermal overload
protection with automatically resettable switch. CAD Drawings:
| 
